Additive tooling: Injection molded plug housing overnight

The increasing need for innovation demands agile product development. We demonstrate how AM decreases turn-around time for injection molded prototypes from several weeks to a few days. As a demonstration, a plug housing is injection molded in 24 hours using the production material (PBT Valox 325).

Presented at the booth of
Injex - Injection Molding Overnight
Halle 2 / E 2166

Showcase (real application example)

Background

Companies experience an ever increasing need for innovation due to shortening life-cycles of their products. As a consequence, agile product development processes have been established in recent years. Rapid prototyping and additive manufacturing are essential parts thereof. However, if near-series quality is demanded injection molding is still the only feasible production method. Approaches using rapid alluminum tooling have already yielded an important saving of time and cost. Nevertheless, typical turn-around times for injection molded prototypes are still in the range of several weeks. This hampers agile product development considerably. 

Additive tooling shortens turn-around time

Injex developped a new kind of production process which combines the advantages of additive manufacturing and the near-series properties of injection molding. This process will be demonstrated by producing a plug housing (see attached pictures). Starting with a shrinkage-compensated CAD-model, a tool consisting of a core, cavity and a threepart slider is constructed. The tool is then fabricated through additive manufacturing. The most difficult challenge is the combination of all targeted properties: Surface quality, contour accuracy, temperatur stability and mechanical resistivity. After several post-processing steps the part production starts. Within half an hour the tool and the manufacturing material can be...

Read more

Background

Companies experience an ever increasing need for innovation due to shortening life-cycles of their products. As a consequence, agile product development processes have been established in recent years. Rapid prototyping and additive manufacturing are essential parts thereof. However, if near-series quality is demanded injection molding is still the only feasible production method. Approaches using rapid alluminum tooling have already yielded an important saving of time and cost. Nevertheless, typical turn-around times for injection molded prototypes are still in the range of several weeks. This hampers agile product development considerably. 

Additive tooling shortens turn-around time

Injex developped a new kind of production process which combines the advantages of additive manufacturing and the near-series properties of injection molding. This process will be demonstrated by producing a plug housing (see attached pictures). Starting with a shrinkage-compensated CAD-model, a tool consisting of a core, cavity and a threepart slider is constructed. The tool is then fabricated through additive manufacturing. The most difficult challenge is the combination of all targeted properties: Surface quality, contour accuracy, temperatur stability and mechanical resistivity. After several post-processing steps the part production starts. Within half an hour the tool and the manufacturing material can be loaded on the machine, which was specifically designed for this purpose. For this plug housing a commercially available PBT was used (SABIC, Valox 325). 

Results

The demonstrated process reduces the turn-around time for a small batch of 10 pieces of these plug housings to less than 24 hours. Even larger series up to several hundred pieces are possible, but take a bit longer. The main advantage of this process is the availability of all production materials already in the prototyping stage. This enables the early testing of near series prototypes and ready-to-use pre-series. 

Testimonials

Dr. Erdal Karamuk – Manager Advanced Materials & Technologies, Sonova AG
«Working with Injex allows us to break new ground in development as we can quickly test new designs. Thanks to the minimal material consumption, new experimental materials that are only available in very small quantities can be processed into prototypes and analyzed.» (translated from German original)



Service groups

Contract manufacturing systems and specialities
    Prototyping

Application

Equipment manufacturing

Customer

Interner Demonstrator

Focus topic

Rapid prototyping & rapid tooling

Gallery

Provider who helped realising this showcase

Injex - Injection Molding Overnight

Spritzgussprototypen und Kleinserien in Tagen statt Wochen. Thermoplaste, Silikone, Keramiken und Metalle - Alles ist möglich.

Halle 2 / E 2166

Your contact person at Injex - Injection Molding Overnight

Get in contact with:

Oliver Schlatter
Management board
Field of competence: Kundenbeziehungen, R&D

Image of   Oliver Schlatter

Share this page